حصري حصري حصري وبدون منازع الاصدار الاحدث لتفعيل ويندوز8.1واوفيس2013 بدون نتKMSmicro v5.0.1

الزيارات:

اخوانى هذه اداه لتفعيل ويندوز8.1واوفيس2013و2010 بدون انترنت وهى بعمل سيرفر على جهازك لموقعkms ويتم التفعيل الاكيد الادا ه مع الشرح فديو ارجو ان تستفيدوا منها

KMSmicro v5.0.1 By Ratiborus حجم الاداه140 ميقا

نبذه عنها

 KMSmicro 5.0.1                                          │
├───────────────────────────────────────────────────────────────────────────────────┤
│ The local KMS server to activate Windows 7 - 8.1, Office 2010-2013 VL editions    │
│               This program does not activate Retail editions.                     │
└───────────────────────────────────────────────────────────────────────────────────┘

System Requirements:
   • Any x86 or x64 compatible computer (even running inside the virtual machine)
   • 512 MB RAM
   • Keyboard
   • Mouse
   • You can run the activator from a flash drive
   • The requirements for disk space (approx.):
       ♦ 200 MB 
 
Features:
  • Counters activate KMS-server screwed on startup.
  • Time / date KMS server is synchronized with the startup time / date 
    the host computer.
 
Note: 
CCM server starts to activate when called upon for the activation of more
than 25 computers. Then, since it starts the computer 26 to activate it. 
Less than 25 computers there will be no activation.



I. Before using
───────────────────────
Make sure that the laptop port 1688 is not used by another activator:
  ZWT KMS Keygen and activators that use it.
Remove these activators, stop the process of ZWT KMS Keygen
II. Running KMSmicro
───────────────────
Run KMSmicro.exe

III. Setting date / time for KMSmicro
───────────────────────────────────
For a successful KMS-activation is important that the time on the computer and on-activated
KMS-server differed by no more than ± 1.5 hours. Thus, using the exchange
UTC (Coordinated Universal Time), which may be different from that
is displayed on the computer's clock.
Therefore, it is important to set date / time KMSmicro.
For 99% of the users apply the following procedure:
 1. Start KMSmicro.
 2. Replace KMSmicro Console time zone that corresponds to the time-zone-activated
**** computer (supplied KMSmicro its time zone is set to UTC +04
**** (GMT, Greenwich). To do this, press Z, then again Z, select your time zone
**** After setting the time zone KMSmicro Console is turned off.
 3. Wait until the console is shut down and turn it on again.

    ****All keystrokes on the keyboard by pressing Entr.****

When you run KMSmicro its time is automatically synchronized
with time in the computer to be activated (that runs KMSmicro).
Conveniently, you can activate without readjustment all the computers in your region
(provided that they are exposed to correct / same time zone).
If you make the settings as you wish, do experiments, after the launch KMSmicro don't forget to install :
  • Time zone
  • Date
  • Time
 Otherwise activation won't work.

 4. After setting up KMSmicro Console tab "Settings" you can check mark on 
    "Run QEMU without GUI", in this mode, the console will be run in a hidden form.


IV. Product Activation
──────────────────────
Windows 8.1 and Office 2010, Office 2013 installed on it:
 1. Set in TAP-Windows Adapter. 
    To do this, go to the Settings tab of the program
****and click the "Install TAP". Once the adapter is installed it should
****be renamed to "tap1"
    Sometimes the TAP adapter is not initialized, KMSmicro Console does not start. This is
****can be read from the log QEMU, clicking on the "Settings" tab click "Log QEMU".
****Helps remove and reinstall the adapter, reboot.
    Also, if you have two or more network adapters - you can at the time of activation
****turn them off.
 2. Select the tab of the "Network Connections" of your Network adapter and 
    TAP-Windows Adapter tap1 by holding down the Ctrl key and
****pressing the right mouse button, select the menu item "Bridge Connections"
 3. On the Settings tab, select the network setup "Network through the TAP interface"
 4. In the main window, click "Start KMSmicro Console" and look forward to 
    when KMSmicro Console boot.
 5. Activate.

* You can skip point number 2, the activation takes place and no association
** Network Bridge. But KMSmicro Console will not have access to the Internet.

Complicated? Yes, more difficult than it was in previous versions of KMSmicro. 
But it is not our whim, this is due to changes in the operating system Windows 8.1. 
TAP adapter is then mounted you can not delete it in the system or not interfere.


Windows 7 or Office 2010-2013 installed on Windows 7-8:
 1. On the Settings tab, select the network setup "Network 127.0.0.2:1688"
****IP address 127.0.0.2
 2. In the main window, click "Start KMSmicro"
****and look forward to when KMSmicro Console boot.
 3. Activate.



V. Activation may not occur for the following reasons:
───────────────────────────────────────────────────────
 1. Product key loose / not mounted.
 2. You are trying to activate an unsupported product (Retail
****Windows 8 - 8.1).
 3. The counter value of activations on KMSmicro not sufficient for
****successful activation (the counter is not "screwed up").
    Follow the winding counters: <C>.
    This situation can only occur in one
****if: you changed the date on the computer-activated and KMSmicro more
****than 30 days after starting KMSmicro.
 4. The server was unable to connect to the computer, the computer has busy port 1688.
****Other activators or unavailable TAP adapter.
    Remove all the "activators" and "cracks" for the Office of 2010-13.
 5. Time-zone of activated computer is different from the time zone KMSmicro.
    Adjust the settings for date / time.
 6. Try changing to the KMS-server any of 127.0.0.2-127.0.0.254 range, 
    while using TAP Interface instead of the KMSmicro (KMSMICRO-PC) 
 to set the real IP address KMSmicro Console, which can be viewed by 
 clicking on the console and pres Enter.
 7. Our KMSmicro is not compatible with your computer.
    This has never happened, so you are very unlucky :(
 8. There has been something completely unforeseen, beyond the scope of this FAQ.

If you encounter problems, when asking for help provide maximum possible
information:
  • System structure;
  • De******ion of the issue;
  • Post protocols / screenshots;
  • If the folder is a file qemu stderr.txt, lay out its contents.

VI. Some KMSmicro Console service commands 
─────────────────────────────────────────
  Ctrl+Alt+U - aligns the window KMSmicro, if you changed it with the mouse
    Ctrl+Alt - switches the cursor to the window / out of the window

Advice:
   The mouse in the window KMSmicro Console can not work at all, all the commands
   are executed via keyboard.

┌─────────────────────────────────────────────────────────────────────────────┐
│ In KMSmicro the address is 127.0.0.1-127.0.0.254 (localhost), port 1688.    │
│ KMSmicro has access to the Internet for time synchronization.               │
└─────────────────────────────────────────────────────────────────────────────┘

┌─────────────────────────────────────────────────────────────────────────────┐
│ Changes in version 5.0.1                                                    │
│    • Added the ability to specify the installation Office.                  │       
└─────────────────────────────────────────────────────────────────────────────┘

┌─────────────────────────────────────────────────────────────────────────────┐
│ Changes in version 5.0.0                                                    │
│    • Activation Support for Windows 8.1                                     │       
└─────────────────────────────────────────────────────────────────────────────┘

┌─────────────────────────────────────────────────────────────────────────────┐
│ Changes in version 4.9.0. Office:                                           │
│    • Activation Support for Office 2010-2013 on Windows 8.1                 │       
│    • New User Interface.                                                    │
└─────────────────────────────────────────────────────────────────────────────┘